Stainless Steel
Sheets and plates for tanks, vessels, heat exchangers and process equipment.
Product Overview
Sheets & Plates Stockist and Supplier
We supply sheets, plates and coils in carbon steel, stainless steel, low temperature carbon steel, alloy steel and steam boiler quality, along with exotic materials in nickel, Monel, Incoloy, Hastelloy, Inconel, cupronickel and titanium.
Stainless steel sheets, plates and coils are regularly supplied to engineering firms that manufacture and fabricate process equipment, with third party inspection available on request.
- Stainless steel sheets, plates and coils
- Pressure vessel and boiler quality plates
- Exotic nickel and titanium grades
- Third party inspection on request
FormsSheets, Plates, Coils
StainlessASTM A240, SA240
Carbon SteelA515, A516, IS 2062
Alloy SteelASTM A387
Sheets & Plates Specifications
- Stainless Steel
- ASTM A240, ASME SA240, AISI
- Carbon Steel
- ASTM A515, A516 Grade 60 and 70, IS 2062
- Alloy Steel
- ASTM A387 Class I and II, Grade 11, 22, 5, 9, 12, 1
- Nickel Alloys
- ASTM B162, B127, B463, B168, B443
- Copper Alloys
- Aluminium, Copper, Brass and Gunmetal
- Exotic Materials
- Nickel, Monel, Incoloy, Hastelloy, Inconel, Cupronickel and Titanium
- Form
- Sheet, Plate, Coil
- Inspection
- Third party inspection available, including Bureau Veritas, DNV, Lloyds, EIL and IBR
Sheets & Plates Grades
Stainless Steel
- 304
- 304L
- 304H
- 310
- 310S
- 316
- 316L
- 316Ti
- 317
- 317L
- 321
- 321H
Carbon Steel
- A515 Gr 60
- A515 Gr 70
- A516 Gr 60
- A516 Gr 70
- IS 2062
Alloy Steel
- A387 Gr 1
- A387 Gr 5
- A387 Gr 9
- A387 Gr 11
- A387 Gr 12
- A387 Gr 22
Nickel and Copper Alloys
- Monel
- Inconel
- Incoloy
- Hastelloy
- Cupronickel
- Titanium
Materials
Carbon Steel
Structural and pressure vessel plates for fabrication work.
Boiler Quality
Plates for boilers and pressure vessels in moderate and high temperature service.
Alloy Steel
Chrome-moly plates for elevated temperature pressure vessels.
Nickel Alloys
Exotic plates for reactors and severe corrosive service.
Copper Alloys
Aluminium, copper, brass and gunmetal sheets for electrical and marine use.
Chemical Composition
Swipe to see all columns
| Grade | C | Mn | P | S | Si | Cr | Ni | Mo | Others |
|---|---|---|---|---|---|---|---|---|---|
| Stainless Steel, Flat Rolled | |||||||||
| 304 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 18.0 - 20.0 | 8.0 - 10.5 | - | N 0.10 |
| 304L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 18.0 - 20.0 | 8.0 - 12.0 | - | N 0.10 |
| 310S | 0.08 | 2.00 | 0.045 | 0.030 | 1.50 | 24.0 - 26.0 | 19.0 - 22.0 | - | - |
| 316 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 16.0 - 18.0 | 10.0 - 14.0 | 2.0 - 3.0 | N 0.10 |
| 316L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 16.0 - 18.0 | 10.0 - 14.0 | 2.0 - 3.0 | N 0.10 |
| 317L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 18.0 - 20.0 | 11.0 - 15.0 | 3.0 - 4.0 | N 0.10 |
| 321 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 17.0 - 19.0 | 9.0 - 12.0 | - | Ti 5 x (C + N) min, 0.70 max |
| Carbon Steel | |||||||||
| A516 Gr 60 | 0.21 - 0.27 | 0.60 - 1.20 | 0.025 | 0.025 | 0.15 - 0.40 | - | - | - | Carbon varies with thickness |
| A516 Gr 70 | 0.27 - 0.31 | 0.85 - 1.20 | 0.025 | 0.025 | 0.15 - 0.40 | - | - | - | Carbon varies with thickness |
| IS 2062 E250 | 0.23 | 1.50 | 0.045 | 0.045 | 0.40 | - | - | - | CE 0.42 |
| Alloy Steel, ASTM A387 | |||||||||
| Gr 5 | 0.15 | 0.30 - 0.60 | 0.025 | 0.025 | 0.50 | 4.00 - 6.00 | - | 0.45 - 0.65 | - |
| Gr 9 | 0.15 | 0.30 - 0.60 | 0.030 | 0.030 | 1.00 | 8.00 - 10.00 | - | 0.90 - 1.10 | - |
| Gr 11 | 0.05 - 0.17 | 0.40 - 0.65 | 0.025 | 0.025 | 0.50 - 0.80 | 1.00 - 1.50 | - | 0.45 - 0.65 | - |
| Gr 22 | 0.05 - 0.15 | 0.30 - 0.60 | 0.025 | 0.025 | 0.50 | 2.00 - 2.50 | - | 0.90 - 1.10 | - |
Values are for reference, as per the relevant standard. Percentages are maximum unless a range or minimum is shown. Actual values are stated on the mill test certificate.
Mechanical Properties
| Grade | Tensile (MPa) | Yield (MPa, min) | Elongation (%, min) |
|---|---|---|---|
| Stainless Steel, Flat Rolled | |||
| 304 | 515 min | 205 | 40 |
| 304L | 485 min | 170 | 40 |
| 310S | 515 min | 205 | 40 |
| 316 | 515 min | 205 | 40 |
| 316L | 485 min | 170 | 40 |
| 317L | 515 min | 205 | 40 |
| 321 | 515 min | 205 | 40 |
| Carbon Steel | |||
| A516 Gr 60 | 415 - 550 | 220 | 25 |
| A516 Gr 70 | 485 - 620 | 260 | 21 |
| A515 Gr 60 | 415 - 550 | 220 | 25 |
| A515 Gr 70 | 485 - 620 | 260 | 21 |
| IS 2062 E250 | 410 min | 250 | 23 |
| Alloy Steel, ASTM A387 Class 2 | |||
| Gr 5 | 515 - 690 | 310 | 18 |
| Gr 9 | 515 - 690 | 310 | 18 |
| Gr 11 | 515 - 690 | 310 | 22 |
| Gr 22 | 515 - 690 | 310 | 18 |
Carbon steel elongation is on a 50 mm gauge length. Stainless steel sheet of 1.27 mm and below has an elongation of 20% min.
Dimension Chart
Common Sheet and Plate Sizes
| Metric Size (mm) | Imperial Size | Typical Use |
|---|---|---|
| 1000 x 2000 | 3 ft x 6 ft | Sheet |
| 1220 x 2440 | 4 ft x 8 ft | Sheet and thin plate |
| 1250 x 2500 | 4 ft x 8 ft approx. | Sheet and thin plate |
| 1500 x 3000 | 5 ft x 10 ft | Sheet and plate |
| 1500 x 6000 | 5 ft x 20 ft | Plate |
| 2000 x 6000 | 6.5 ft x 20 ft | Plate |
| 2500 x 6000 | 8 ft x 20 ft | Plate |
Sizes are industry standard reference sizes. Please confirm current availability when you enquire.
Theoretical Weight Chart (kg per square metre)
Swipe to see all columns
| Thickness (mm) | Carbon Steel | Stainless Steel | Aluminium | Copper |
|---|---|---|---|---|
| 1 | 7.85 | 7.93 | 2.70 | 8.94 |
| 1.5 | 11.77 | 11.89 | 4.05 | 13.41 |
| 2 | 15.70 | 15.86 | 5.40 | 17.88 |
| 3 | 23.55 | 23.79 | 8.10 | 26.82 |
| 4 | 31.40 | 31.72 | 10.80 | 35.76 |
| 5 | 39.25 | 39.65 | 13.50 | 44.70 |
| 6 | 47.10 | 47.58 | 16.20 | 53.64 |
| 8 | 62.80 | 63.44 | 21.60 | 71.52 |
| 10 | 78.50 | 79.30 | 27.00 | 89.40 |
| 12 | 94.20 | 95.16 | 32.40 | 107.28 |
| 16 | 125.60 | 126.88 | 43.20 | 143.04 |
| 20 | 157.00 | 158.60 | 54.00 | 178.80 |
| 25 | 196.25 | 198.25 | 67.50 | 223.50 |
| 32 | 251.20 | 253.76 | 86.40 | 286.08 |
| 40 | 314.00 | 317.20 | 108.00 | 357.60 |
| 50 | 392.50 | 396.50 | 135.00 | 447.00 |
Calculated using densities of 7.85, 7.93, 2.70 and 8.94 g/cm3.
Applications
Chemical Processing
Reactors, tanks and vessels for chemical and fertilizer plants.
Oil & Gas
Pressure vessels, columns and heat exchanger shells.
Power Plants
Boiler drums, headers and high temperature fabrication.
Manufacturing
Fabrication units and process equipment manufacturers.
Infrastructure
Structural plate for civil and infrastructure works.
Water Treatment
Tanks and treatment equipment in corrosive water service.
Ready to Discuss Your Project?
Get in touch with us today for premium industrial piping & metal solutions.