Tensile, yield, elongation and hardness values for stainless steel, carbon steel, alloy steel and nickel alloys. Select a section below.
Swipe to see all columns
| Grade | Tensile Strength (MPa, min) | Yield Strength (MPa, min) | Elongation in 50 mm (%, min) | Hardness BHN (max) | Hardness Rb (max) |
|---|---|---|---|---|---|
| 301 | 515 | 205 | 40 | 217 | 95 |
| 304 | 515 | 205 | 40 | 201 | 92 |
| 304L | 485 | 170 | 40 | 201 | 92 |
| 310S | 515 | 205 | 40 | 217 | 95 |
| 316 | 515 | 205 | 40 | 217 | 95 |
| 316L | 485 | 170 | 40 | 217 | 95 |
| 317 | 515 | 205 | 35 | 217 | 95 |
| 317L | 515 | 205 | 40 | 217 | 95 |
| 321 | 515 | 205 | 40 | 217 | 95 |
| 347 | 515 | 205 | 40 | 201 | 92 |
| 409 | 380 | 170 | 20 | 179 | 88 |
| 409M | 430 | 275 | 20 | 187 | 90 |
| 410S | 415 | 205 | 22 | 183 | 89 |
| 410 | 450 | 205 | 20 | 217 | 89 |
| 420 | 700 (max) | - | 15 | 217 | 95 |
| 430 | 450 | 205 | 22 | 183 | 89 |
| JSL AUS | 515 | 205 | 40 | 217 | 95 |
| JS 203 | 515 | 205 | 40 | 217 | 95 |
| 301M | 515 | 205 | 40 | 217 | 95 |
Swipe to see all columns
| Specification | Tensile (MPa, min) | Yield (MPa, min) | Elongation in 50 mm (%, min) | Requirement |
|---|---|---|---|---|
| Carbon Steel Pipe | ||||
| ASTM A53 Gr A | 331 | 207 | 36 | Cr + Mo + Cu + Ni + V not to exceed 1% |
| ASTM A53 Gr B | 413 | 240 | 29.5 | Cr + Mo + Cu + Ni + V not to exceed 1% |
| ASTM A106 Gr A | 330 | 205 | 35 / 28 | - |
| ASTM A106 Gr B | 415 | 240 | 30 / 22 | - |
| ASTM A106 Gr C | 485 | 275 | 30 / 22 | - |
| Low Temperature Pipe and Tube | ||||
| ASTM A333 Gr 1 | 380 | 205 | 25 / 20 | Impact tested at -50 F |
| ASTM A333 Gr 6 | 415 | 240 | 30 / 22 | Impact tested |
| ASTM A334 Gr 1 | 380 | 205 | 35 / 28 | Impact tested at -50 F |
| ASTM A334 Gr 6 | 415 | 240 | 30 / 22 | Hardness 90 HRB max |
| Boiler and Heat Exchanger Tube | ||||
| ASTM A179 | 325 | 180 | 35 | Hardness 72 HRB max |
| ASTM A214 | 385 | 180 | 35 | Hardness 72 HRB max |
| ASTM A192 | 325 | 180 | 35 | Hardness 77 HRB max |
| ASTM A209 T1 | 380 | 205 | 30 / 22 | Hardness 80 HRB max |
| ASTM A209 T1a | 415 | 220 | 30 / 22 | Hardness 81 HRB max |
| ASTM A209 T1b | 365 | 195 | 30 / 22 | Hardness 77 HRB max |
| ASTM A210 A-1 | 415 | 255 | 30 / 22 | Hardness 79 HRB max |
| ASTM A210 C | 485 | 275 | 30 / 22 | Hardness 89 HRB max |
| ASTM A213 T2 | 415 | 205 | 30 / 22 | Hardness 85 HRB max |
| ASTM A213 T5 | 415 | 205 | 30 / 22 | Hardness 85 HRB max |
| ASTM A213 T11 | 415 | 205 | 30 / 22 | Hardness 85 HRB max |
| ASTM A213 T12 | 415 | 220 | 30 / 22 | Hardness 85 HRB max |
| ASTM A213 T22 | 415 | 205 | 30 / 22 | Hardness 85 HRB max |
| Alloy Steel Pipe | ||||
| ASTM A335 P1 | 380 | 205 | 30 / 22 | - |
| ASTM A335 P2 | 380 | 205 | 30 / 22 | - |
| ASTM A335 P5 | 415 | 205 | 30 / 22 | - |
| ASTM A335 P9 | 415 | 205 | 30 / 22 | - |
| ASTM A335 P11 | 415 | 205 | 30 / 22 | - |
| ASTM A335 P12 | 415 | 220 | 30 / 22 | - |
| ASTM A335 P22 | 415 | 205 | 30 / 22 | - |
| BS and DIN Tube Specifications | ||||
| BS 3059 Pt 1 Gr 33 | 324 - 441 | 186 | 25 | - |
| BS 3059 Pt 2 Gr 33 | 324 - 441 | 186 | 21 | - |
| BS 3059 Pt 2 Gr 45 | 441 - 560 | 245 | 22 | - |
| BS 3059 Pt 2 Gr 620 | 441 - 618 | 235 | 22 | - |
| DIN 17175 St 35.8 | 340 - 441 | 235 | 25 | - |
| DIN 17175 St 45.8 | 441 - 540 | 255 | 21 | - |
| DIN 17175 15Mo3 | 441 - 540 | 284 | 21 | - |
| DIN 17175 13CrMo44 | 441 - 570 | 294 | 22 | - |
| DIN 17175 10CrMo910 | 441 - 570 | 294 | 22 | - |
| ASTM A199 and A200 Tube | ||||
| ASTM A199 T4 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A199 T5 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A199 T7 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A199 T9 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A199 T11 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A199 T22 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A200 T4 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A200 T5 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A200 T7 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A200 T11 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| ASTM A200 T22 | 415 | 170 | 30 / 22 | Hardness 85 HRB max |
| Precision and Heat Exchanger Tube (IS, DIN, BS) | ||||
| IS 3074 CDS 1 | 432 | 373 | - | - |
| IS 3074 CDS 2 | 432 | 373 | - | - |
| IS 3074 CDS 3 | 432 | 373 | - | - |
| IS 3074 CDS 4 | 569 | 461 | - | - |
| IS 3074 CDS 5 | 687 | 589 | - | - |
| DIN 2391 Pt 1 St 35 | 432 | - | 5 | - |
| DIN 2391 Pt 1 St 45 | 540 | - | 5 | - |
| BS 6323 Pt 4 | 520 | 415 | 5 | - |
Where two elongation values are shown, the first is longitudinal and the second is transverse.
| Alloy | Tensile (MPa, min) | Yield (MPa, min) | Elongation (%, min) |
|---|---|---|---|
| Monel 400 | 480 | 195 | 35 |
| Monel K 500 (age hardened) | 960 | 690 | 20 |
| Hastelloy C276 | 690 | 283 | 40 |
| Hastelloy B2 | 760 | 350 | 40 |
| Incoloy 800 | 520 | 205 | 30 |
| Incoloy 825 | 586 | 241 | 30 |
| Inconel 600 | 550 | 240 | 30 |
| Inconel 601 | 550 | 205 | 30 |
| Inconel 625 (Grade 1) | 827 | 414 | 30 |
| Alloy 904L | 490 | 220 | 35 |
| Duplex S31803 | 620 | 450 | 25 |
| Super Duplex S32750 | 795 | 550 | 15 |
| Titanium Grade 2 | 345 | 275 | 20 |
Typical values in the annealed condition unless stated. Actual properties depend on product form and heat treatment.
Get in touch with us today for premium industrial piping & metal solutions.